| Books | |
|
|
|
The Injection Moulding of Thermoplastics Niemann, Renger & Kempf (1992) |
An informative introduction to injection moulding, includes chapters on : - The basic principles of thermoplastic engineering - process engineering - microprocessor based control systems - integrated quality assurance - machine set-up strategies - Processing errors and corrective action. - Pressure measurement within the mould |
|
|
|
|
The Guide to Surface Defects on Thermoplastic Injection Moulded Parts K.I.M.W. Kunststoff Institut (1992) |
Surface quality of thermoplastic injection moulded parts is often the main criterion for quality. This booklet shows how surface defects occur and how they may be corrected. Includes chapters on : - Sink Marks - Shorts - Streaks - Gloss - Voids - Stress Whitening - Warping and Deformation |
|
|
|
|
Gas Injection & Two Component Injection Moulding Ehritt & Schroeder (1995) |
The production of thick walled mouldings from thermoplastic materials by conventional injection moulding techniques presents many problems. The patented "Airmould" gas- and co-injection process solve these and many other problems, whilst offering many additional advantages. Includes chapters on: - The Airmould process compared with other gas-injection processes - Special features of Airmould gas-injection - Processing with Airmould - Airmould combined with multi-component injection moulding - Multi-component moulding - A look into the future |